How to Open Phone Lock / Security Code Nokia

If you experience problems "Phone lock", so no need to panic, because there are some initial steps that can be done to overcome that is by way of entering a standard code used is 12345, 1234, 0000. 000,000 and 000,000,000. If not successful, try to do with numbers free.

You do not need to worry about making mistakes entering the code unless there is a warning display try testing the limits, the experience is usually found in Sony Ericsson mobile phones.

Specifically for Samsung mobile phones can be reset EEPROM directly by entering the code * 2767 * 2878 # in the living conditions without using a mobile phone simcard. If not managed well then you can take it to service center to open the Phone Lock.

Corrective action is generally done by software, continued introduction of how to use the UFS TORNADO this edition we will try to provide remedial measures to overcome the problem of software that the phone is locked by a password code (Phone Lock)

Opening the Phone Lock Nokia
DCT-3 (3610, 2100, 8210, 8250, 3310, 3315 ... 6090)

* Connect your phone with UFS tornado on the PC
* Make sure the phone is well connected with the menu click 'check' on display in the PC tornadoes.
* Select DCT 3
* Click the type of phone that will be unlocked.
* Click reset user lock 2x
* Then click full factory default 2x
* Wait until the OK
* Click the disconnect

Opening the Phone Lock Nokia DCT-4
(8310, 3300, 3530, 3510, 7210, 3100 ...)

* Connect your phone with UFS tornado
* Make sure the phone is connected properly
* Select DCT 4
* Click on the phone that will unlock
* Click reset user lock 2x
* Then click full factory default 2x
* Wait until the OK
* Click the disconnect

The program steps you can take to make improvements Phone Lockk for WD2 phone type (N-Gage, N-GageQD, 3650, 3660, 6600, 7610, ...) and BB5 (6630, 6680, N70, N90 ...