Get paid To Promote at any Location Handphone: IMPROVEMENT BLINKING RED SONY ERICSSON

Senin, 14 Desember 2009

IMPROVEMENT BLINKING RED SONY ERICSSON

Have tried to service a variety of software but will not boot and there was no sign of life ... because HP was not detected at all. Try to press the button on notice lights / LED blinking at the top. ups red flashes 5x. Ok already see the problem.
That means your battery is low or EROM problem. Make sure you use Battery completely charged (use the desktop charger) if necessary kroscek with other Nokia phones using the battery or can be measured with multitester.
If it turns out a full battery problem exists and needs to be done EROM flash EROM. If EROM problem HP will die despite full battery.

So how to repair EROM flashing? Terdetek while HP is not at all?
follow these steps:

What we need is software Setool 2 lite and DCU60 cable and a USB flash drivers already installed on your computer.

USB flash drives can be installed in 2 ways namely:

1. Using the HP is still healthy as an angler instalan USB flash drives.
When finished downloading, extract the file to the folder / drive you want to tg. For example D: \ USBFlash_drver

Next, prepare hp and data cable.
HP lethal
-Disconnect the battery, SIM Card and Memory Card
Battery Back-Connect, HP still be at a dead.
-Hold down the 'C' on the mob
-Connect the hp and the pc via usb cable, the C remained in detention.

in the system tray will display a message SEMC USB Flash Device

Furthermore, the new window appears "Found new hardware wizard" that asks drivers for this device.
>> No, not this time
>> Next.
>> INSTALL FROM A Specified LOCATION (ADVANCED)
>> Next
>> Search for the best drivers in these locations
>> check "Include this location in this search"
>> Browse / select where you store the USB Flash Drivers who have previously diextract eg D: \ USBFlash_drver
>> Next
>> windows will install the hardware they will be ....
>> Done
Remove hp, USB flash drives have been installed.

2. An easier way of using USB flash drives instalan automatic if you have not got please download and install a new first step to the next stage.

REPAIR EROM

* Open Setool 2 lite
* Insert battery into the HP (simcard and removable Memory Card used)
* Click Unlock \ Repair Button
* While holding the button 2 and 5 together, plug the cable into the HP DCU60
* Wait Setool 2 lite will repair EROM
* Finish

Tidak ada komentar:

Posting Komentar

 
Custom Search